オーリック・セリーヌ

シェア


お困りですか。 サムスンのリモコンアプリが充電されません? If you have an older model (white or aluminum), just replace the batteries. For newer Siri Remotes with a charging cable, charging issues can occur. Don't worry, this post offers simple fixes to help resolve the problem.

Why Apple Remote Not Charging

There are several potential reasons why your Apple TV remote might not be charging. Understanding these can help you pinpoint the issue and find a solution quickly. Here are some of the most common causes:

  • Charging Cable or アダプター Issue: The cable or charging adapter might be faulty. Try using a different cable or adapter to see if that solves the problem.
  • Dirty Charging Port: Dirt or debris in the charging port can prevent a proper connection. Make sure the charging port is clean and free from any obstruction.
  • Battery Health: If the remote has been used for a long time, the battery might be worn out and unable to hold a charge. In this case, the battery may need to be replaced.
  • Software Glitch: Sometimes, a software issue can prevent the remote from charging or syncing properly. Restarting your Apple TV or resetting the remote might help.
  • Charging Time: If the remote's battery is completely drained, it may take a few minutes before it shows any sign of charging. Give it some time to start charging after plugging it in.
  • リモコンアプリの故障: If none of the above fixes work, the remote itself might be defective. In this case, contacting Apple Support or visiting an Apple Store could be the best option.

Solutions to Apple TV Remote Wont Charge

If your Apple TV remote isn't charging, it can be frustrating, but don't worry—there are several steps you can take to resolve the issue. From simple checks like ensuring your charging cable is functioning correctly to more detailed troubleshooting, we've got you covered.

解決策1: 別の充電ソケットを試す

If your Apple TV remote won't charge, start by checking if the outlet is working. You can test this by plugging in another device. If that device charges without issue, the outlet is likely fine. In that case, focus on troubleshooting the charger or the remote itself, as there may be an issue with the connection or the charger.

During this process, you can check the charging state of your Apple TV remote 、そして 設定 > リモコンとデバイス > リモコンアプリ Apple TVで。

Fix 2. Try a Sound Charging Cord

As mentioned at the beginning of this passage, your Apple TV Remote or Siri Remote is assembled with a charging cable, so the cable may have a potential problem if you can't charge the remote.

a Lightning charging cable and a USB-C charging cable

Apple TVリモコンまたはSiriリモコン第1世代または第2世代は、装備されています。 ライトニング充電ケーブル、Apple TVリモコンまたはSiriリモコン3は装備されています USB-C充電ケーブル. To prevent the bad charging cable, you are supposed to use another sound charging cord instead according to your remote port.

Fix 3. Clean the Charging Port

Dirt or dust is also a factor that impacts your Apple TV remote not charging. When the charging port is clogged by tiny dust, contact from properly connecting to the charger will be interfered with. So you can use a wooden toothpick, or a soft and clean bush to gently clean the dirt. Then try to Apple TV のリモコンアプリを充電してください もう一度。

解決策4: Apple TVリモコンをリセットする

If none of these fixes solve the issue and your Apple TV remote still isn't charging, the next step is to reset the Apple TV remote. Sometimes, a simple reset can resolve underlying software glitches or connectivity issues that are preventing the remote from charging properly.

Apple TV Remote or Siri Remote (1st, 2nd, 3rd gen)

ステップ1. 押してください テレビ そして ボリュームダウン buttons at the same time until your Apple TV's status light flashes, then release.

Remote Connection Lost notification

ステップ2. When you see a 接続が失われました。 テレビ画面に通知が表示された場合、それはあなたのApple TVリモコンが自動的に再起動し、Apple TVに接続することを意味します。

Remote Connected notification

ステップ3. ときに 接続済み 通知が表示され、リモコンが再び接続されていることを示します。その後、充電を試み、バッテリーレベルを確認してください。 設定 > リモコンとデバイス > リモコンアプリ アップルTVで。

これらの解決策がどれも機能しない場合は、 アップルサポートに連絡してください。 to see what's wrong with your Apple TV Remote and how to repair it. Or if you want to watch App TV right now, there are two virtual remotes recommended to you.

解決策5. 仮想のApple TVリモコンを使用する代わりに

その事実 Apple TV remote doesn't work caused by the drained battery is frustrating. To relieve your vexation, this passage will show you two virtual Apple TV remotes that you can use as a physical remote.

Alternative 1. Apple TV Remote in Control Center

iPhoneやiPadには、コントロールセンターに組み込まれたApple TVリモコンがあります。右上から下にスワイプするか、下側から下にスワイプして探すことができます。

Apple TV Remote feature in the Control Center

ステップ1. Find and open the Apple TV Remote feature in the Control Center on your iOS device. If you don't see it, then go to 設定 > コントロールセンター > もっとコントロール この機能を追加するには 含まれるコントロール.

ステップ2. iPhoneまたはiPadがApple TVまたはAirPlay対応のスマートテレビと同じWi-Fiネットワークに接続されていることを確認してください。

Apple TV Remote feature

ステップ3. タップしてください。 テレビを選ぶ Apple TVに4桁のパスワードでペアリングする方法です。このパスワードはテレビ画面に表示されます。

ステップ4. ペアリングプロセスを完了した後、iOSデバイスのApple TVリモコン機能を使用してApple TVを制御できます。

Alternative 2. Free Universal Apple TV Remote App

If you don't own any Apple devices, you can still control your Apple TV using a free universal Apple TV remote app available for both iOS and Android mobile devices. The app also works with most Apple TV models and includes useful features like screen mirroring to enhance your viewing experience.

Apple TVの汎用型リモコンアプリ

ステップ1. アンドロイドデバイスのアプリストアからユニバーサルApple TVリモコンアプリをダウンロードしてインストールしてください。

万能リモコンアプリをダウンロードします

ステップ2. AndroidデバイスとApple TVが同じ無線ネットワークに接続されていることを確認し、Apple TVに接続するためにそれを開きます。

PIN code entry of Universal Apple TV Remote App

ステップ3. デバイスリストからApple TVを選択し、PINコードを入力してデバイスをApple TVにペアリングします。

ステップ4. ペアリング処理を終えた後、Androidデバイス上のApple TVリモコンアプリを使用して、Apple TVを制御できます。

最終的な結論

Apple TVリモコンの充電が持たない問題に対処する方法は?異なる充電コンセントを試す、正常な充電コードを試す、充電ポートを掃除する、Apple TVリモコンをリセットする、または仮想Apple TVリモコンを使用する。このブログが問題の解決に役立ち、Apple TVを楽しむことが再開できることを願っています。

Apple TVリモコンアプリの充電ができないのFAQ

Q: What can I do if my Apple TV Remote won't charge?

  1. 異なる充電用コンセントを試してください。
  2. サウンド充電コードを試してください。
  3. 充電ポートを掃除してください。
  4. Apple TVリモコンをリセットしてください。
  5. アップルのサポートに連絡してください。
  6. 仮想アップルTVリモコンを使用してください。

Q: Apple TVのリモコンアプリは充電中に点灯しますか?

I'm sorry that the answer is no. There is no signal that you can see when your Apple TV Remote is charging. The only way to check the battery percentage of your Apple TV Remote or Siri Remote is to go to 設定 > リモコンとデバイス > リモコンアプリ on the Apple TV. Usually, the Siri Remote will take about three hours to fully charge, and you can continue to use the Siri Remote while it's charging.

オーリック・セリーヌ

オーリック・セリーヌはBoostVisionのウェブコンテンツライターで、スマートデバイスに興味があり、視覚体験に注目しています。彼女は、他の人々がストリーミングメディアのトレンドに参加し、彼女と同様に素晴らしい視覚体験を得られるよう、専門的な情報を提供することを目指しています。

back to top